ANIOS R444 Stainless Steel Renovator – 1 L

A Professional Renovator for Stainless Steel Instruments

The ANIOS R444 Stainless Steel Renovator is a concentrated solution developed by Laboratoires ANIOS for the maintenance and restoration of stainless steel instruments and medical devices.

It is specially formulated to remove deposits and oxidation marks that may appear on instruments over time.

It helps to:

• Remove residual protein deposits.

• Eliminate iron oxide deposits.

• Reduce oxidation stains.

• Restore the appearance of stainless steel instruments.

• Maintain compatible metal surfaces.

• Complement professional equipment maintenance procedures.

This product is intended for instrument renovation and does not replace mandatory cleaning, disinfection or sterilisation procedures.

Suitable for Piercing and Tattoo Studios

In piercing and tattoo studios, reusable stainless steel instruments require regular maintenance.

ANIOS R444 can be used on certain compatible equipment, including:

• Stainless steel piercing forceps.

• Professional stainless steel scissors.

• Reusable metal instruments.

• Stainless steel technical accessories.

• Medical devices made from stainless steel and compatible with immersion.

It helps treat oxidation marks and deposits that may affect the appearance of instruments.

Before use, ensure that the instruments are made from stainless steel and that their manufacturer authorises this chemical treatment.

A Phosphoric Acid-Based Formula

ANIOS R444 contains phosphoric acid and surfactants.

This acidic formulation helps remove deposits from stainless steel surfaces.

It is particularly intended for treating:

• Iron oxide deposits.

• Oxidation stains.

• Protein residues.

• Certain residual deposits on instruments.

The product has a pH below 2 in its undiluted form, requiring strict handling precautions.

A Concentrated Solution Requiring Dilution

ANIOS R444 is a concentrated product that must be diluted before use.

The technical documentation recommends a 3 to 5% dilution in lukewarm water.

This corresponds to:

These quantities are provided as a practical guide for preparing the final solution volume. Always follow the dilution instructions on the product label.

Do not use the undiluted product on instruments.

Immersion Treatment

ANIOS R444 is designed for immersion treatment.

Instruments must be placed in a compatible container filled with the previously diluted solution.

The recommended soaking time in recent technical documentation is 1 hour.

After treatment, instruments must be thoroughly rinsed and dried.

The bath must be replaced at least once a day.

Treatment must only be carried out on compatible stainless steel surfaces.

Removes Iron Oxide Deposits

Stainless steel instruments may develop oxidation marks or iron deposits due to their use and working environment.

ANIOS R444 is designed to help remove these deposits.

Its use can help to:

• Remove certain superficial iron oxide deposits.

• Reduce oxidation stains.

• Improve the visual appearance of surfaces.

• Facilitate periodic instrument maintenance.

The product cannot repair instruments affected by deep corrosion, significant pitting or structural damage.

Damaged instruments must be inspected and replaced if necessary.

A 1-Litre Dosing Bottle

ANIOS R444 is supplied in a 1 L dosing bottle.

This format makes it easier to prepare renovation baths.

It helps professionals to:

• Measure the required quantity.

• Prepare solutions at different concentrations.

• Adjust the bath volume to the equipment being treated.

• Reduce dosing errors.

• Organise periodic instrument maintenance.

As a guide, one 1-litre bottle can prepare approximately 20 litres of solution at 5% or 33 litres at 3%, depending on the dilution method.

Directions for Use

Step 1 – Preparation

1. Carefully read the product label and safety data sheet.

2. Wear chemical-resistant gloves, protective goggles and any other necessary protective equipment.

3. Work in a suitable environment.

4. Ensure that the instruments are made from compatible stainless steel.

5. Prepare a container resistant to the acidic solution.

Step 2 – Dilution

6. Prepare lukewarm water.

7. Measure the required quantity of renovator.

8. Dilute the product to a concentration of 3 to 5% according to the manufacturer's instructions.

9. Mix carefully.

10. Do not combine the renovator with other chemical products.

Step 3 – Soaking

11. Fully immerse compatible instruments.

12. Respect a soaking time of approximately 1 hour.

13. Monitor the condition of the instruments.

14. Carefully remove the instruments.

Step 4 – Rinsing and Drying

15. Thoroughly rinse the instruments with tap water.

16. Ensure that all product residues have been removed.

17. Dry the instruments completely.

18. Inspect their condition before reuse.

19. Continue with any required reprocessing steps before using the instruments on a client.

Step 5 – Bath Maintenance

20. Replace the bath at least once a day.

21. Dispose of the used solution according to applicable requirements.

22. Clean and rinse the container after use.

23. Store the bottle under the recommended conditions.

Technical Specifications

• Product name: ANIOS R444 Stainless Steel Renovator

• Brand: ANIOS

• Manufacturer: Laboratoires ANIOS

• Product type: Concentrated renovator for stainless steel instruments

• Main application: Restoration and maintenance of stainless steel instruments

• Capacity: 1 L

• Packaging: 1 dosing bottle

• Quantity: 1 piece

• Form: Concentrated liquid solution

• Appearance: Clear, colourless to slightly yellow liquid

• Composition: Phosphoric acid and surfactants

• pH of undiluted product: Below 2

• pH at 3%: Approximately 1.4

• pH at 5%: Approximately 1.1

• Density at 20°C: Approximately 1.360 g/ml

• Recommended dilution: 3 to 5%

• Dilution water: Lukewarm water

• Application method: Soaking

• Recommended soaking time: 1 hour

• Bath replacement: At least once a day

• Rinsing after treatment: Required

• Drying after treatment: Required

• Compatible material: Stainless steel, subject to the instrument manufacturer's recommendations

• Iron oxide deposit removal: Yes

• Oxidation stain treatment: Yes

• Protein residue removal: Yes

• Disinfectant: No

• Sterilising product: No

• Professional use: Yes

• Recommended storage temperature: Between +5°C and +25°C

• Precautions: Hazardous acidic product

Why Choose ANIOS R444 Stainless Steel Renovator?

• Stainless steel restoration: Helps restore the appearance of instruments.

• Deposit removal: Targets protein residues and iron oxide deposits.

• Oxidation treatment: Helps remove superficial oxidation stains.

• Concentrated formula: 3 to 5% dilution.

• Immersion treatment: Practical for treating several instruments.

• One-hour soaking time: According to technical instructions.

• Dosing bottle: Makes preparation easier.

• 1 L capacity: Suitable for professional needs.

• Equipment maintenance: Complements instrument maintenance procedures.

• ANIOS brand: A specialist in professional hygiene solutions.

The ANIOS R444 Stainless Steel Renovator is a concentrated solution designed for maintaining and restoring stainless steel instruments. Thanks to its phosphoric acid-based formula, it helps remove iron oxide deposits, protein residues and oxidation stains. Used by immersion after dilution in lukewarm water, it is a complementary product for the professional maintenance of piercing and tattoo equipment.