A Professional 3-in-1 Cleaner

ANIOS SPS Premium is specially formulated to perform three essential functions when maintaining professional sanitary areas:

• Cleaning: Removes dirt and residues from surfaces.

• Descaling: Helps dissolve limescale deposits.

• Disinfecting: Reduces microorganisms according to validated antimicrobial activities and contact times.

This triple action simplifies maintenance procedures by combining several functions in a single product.

In professional environments, washbasins, taps and sanitary equipment are regularly exposed to moisture, soap residues and limescale deposits.

ANIOS SPS Premium provides a suitable solution for these everyday challenges, subject to material compatibility.

A Formula with High Descaling Power

ANIOS SPS Premium offers high descaling performance.

Its acidic formulation helps remove mineral deposits that develop on sanitary equipment through regular contact with water.

It is particularly suitable for treating:

• Limescale marks.

• Mineral deposits.

• Water stains.

• Residues around taps.

• Dirt on washbasins.

• Deposits on compatible sanitary surfaces.

This action is particularly useful in areas exposed to frequent cleaning or regular water use.

Effectiveness depends on the thickness of the deposits and the compatibility of the surface.

Detergent Action for Surface Maintenance

In addition to its descaling properties, ANIOS SPS Premium provides detergent action.

It helps remove dirt from sanitary surfaces and facilitates their maintenance.

This property helps to:

• Clean compatible surfaces.

• Remove certain soap residues.

• Treat everyday dirt.

• Facilitate wiping.

• Maintain the cleanliness of sanitary facilities.

The product is particularly suitable for washable surfaces commonly found in bathrooms and sanitary areas.

A Formula Combining Three Active Substances

ANIOS SPS Premium combines several substances contributing to its cleaning, descaling and disinfecting properties.

According to the ANIOS technical data sheet, the composition per 100 g of product includes:

• Didecyldimethylammonium chloride: 0.15 g.

• L(+)-Lactic acid: 2.56 g.

• Glycolic acid: 2.03 g.

The corresponding CAS numbers are:

• Didecyldimethylammonium chloride: CAS 7173-51-5.

• Lactic acid: CAS 79-33-4.

• Glycolic acid: CAS 79-14-1.

The combination of lactic and glycolic acids contributes to the product's descaling properties.

Didecyldimethylammonium chloride contributes to its disinfectant activity.

Bactericidal Activity

ANIOS SPS Premium provides bactericidal activity, evaluated according to several European standards.

The 2024 ANIOS technical data sheet indicates:

• EN 13727: 5 minutes.

• EN 16615: 15 minutes.

• EN 17387: 15 minutes.

These performances are claimed under the test conditions specified by the manufacturer.

To achieve the stated effectiveness, it is essential to respect the contact time corresponding to the relevant standard and intended application.

Bactericidal activity should not automatically be associated with a single contact time, as this varies depending on the test method.

Yeasticidal Activity

ANIOS SPS Premium also provides yeasticidal activity.

This activity is evaluated according to the following standards:

• EN 13624.

• EN 16615.

• EN 17387.

Claimed contact time: 15 minutes.

This property complements the product's antimicrobial spectrum and contributes to the disinfection of compatible sanitary surfaces.

Activity Against Enveloped Viruses

ANIOS SPS Premium provides activity against enveloped viruses.

The 2024 ANIOS technical data sheet indicates:

• EN 14476 / EN 16777.

• Contact time: 5 minutes.

This activity must be distinguished from a full virucidal claim covering all types of viruses.

It is important to follow the conditions of use specified by the manufacturer.

Microbiological Properties Suitable for Professional Maintenance

The main microbiological properties listed in the 2024 ANIOS technical documentation are as follows:

These activities are claimed under the test conditions specified in the manufacturer's documentation.

The required contact times must be respected to achieve the stated disinfectant performance.

Suitable for Stainless Steel, Enamel and Plastic Surfaces

ANIOS SPS Premium is designed for maintaining materials and metals commonly found in bathrooms and sanitary facilities.

It is particularly suitable for the following compatible surfaces:

• Stainless steel.

• Enamelled surfaces.

• Plastic sanitary surfaces.

• Compatible washbasins.

• Compatible taps.

• Sanitary equipment.

• Certain washable surfaces exposed to limescale.

Its formulation has been developed for cleaning, descaling and disinfecting these types of equipment.

Before use, check that the material is compatible with acidic cleaning products.

The product is not intended for indiscriminate application to all metals or surfaces.

A Convenient Solution for Piercing and Tattoo Studios

Piercing and tattoo studios generally have sanitary facilities, water points and surfaces requiring regular maintenance.

ANIOS SPS Premium can be incorporated into cleaning and disinfection procedures for these areas, in accordance with the establishment's hygiene plan.

It may be used to:

• Maintain compatible washbasins.

• Clean sanitary surfaces.

• Remove limescale from areas exposed to water.

• Clean certain taps.

• Maintain compatible stainless steel surfaces.

• Treat mineral deposits.

• Disinfect sanitary surfaces according to the required contact times.

It provides a versatile solution for sanitary areas in professional establishments.

ANIOS SPS Premium is not intended for disinfecting skin, piercings or invasive instruments.

Effective Action Against Limescale Marks

Limescale deposits frequently develop in areas exposed to water.

They may appear on:

• Taps.

• Washbasins.

• Compatible stainless steel surfaces.

• Sanitary equipment.

• Certain plastic surfaces.

• Areas surrounding water points.

Thanks to its organic acid-based formulation, ANIOS SPS Premium helps dissolve these deposits.

Regular cleaning can facilitate the maintenance of installations and limit the accumulation of mineral residues.

An Acidic Formulation

ANIOS SPS Premium is an acidic product, a characteristic associated with its descaling function.

Earlier technical data sheets indicate a pH of approximately 2, subject to formulation tolerances.

This acidity contributes to the removal of limescale deposits.

However, it requires specific precautions:

• Check material compatibility.

• Avoid acid-sensitive surfaces.

• Do not mix with other chemicals.

• Wear appropriate protective equipment.

• Rinse surfaces after application.

Never mix an acidic product with bleach or chlorine-based cleaning products.

A Foaming Spray Trigger for Targeted Application

ANIOS SPS Premium is supplied in a 750 ml bottle equipped with a foaming spray trigger.

This system allows the product to be applied directly to the areas requiring treatment.

It offers several advantages:

• Targeted application: Facilitates the treatment of sanitary surfaces.

• Product distribution: Helps cover the areas to be cleaned.

• Convenient format: Suitable for professional use.

• Ready to use: No dilution required.

• Foaming spray trigger: Facilitates application to surfaces.

• 750 ml capacity: Suitable for regular maintenance.

A Ready-to-Use Solution

ANIOS SPS Premium is a ready-to-use solution.

It requires:

• No dilution.

• No mixing.

• No prior preparation.

• No manual dosing.

• No additional container.

The product can be applied directly to compatible surfaces using the foaming spray trigger.

It may also be applied to a clean wipe before wiping, according to the manufacturer's recommendations.

Application in Accordance with Hygiene Protocols

To ensure effective disinfection, it is essential to follow the manufacturer's instructions for use.

The technical data sheet recommends an application quantity of approximately 30 ml/m².

This quantity helps ensure that sufficient product is applied to the surface being treated.

The contact time must then be adapted to the required microbiological activity.

Cleaning must be carried out in accordance with the establishment's hygiene protocol.

Directions for Use

1. Read the label and safety precautions before use.

2. Check that the surface is compatible with acidic cleaning products.

3. Wear appropriate protective equipment.

4. Ensure the area is properly ventilated.

5. Prepare the surface to be treated.

6. Spray ANIOS SPS Premium evenly onto the surface.

7. The product may also be applied to a clean wipe before wiping.

8. Spread the product across the entire area.

9. Apply a sufficient quantity, approximately 30 ml/m².

10. Respect the contact time corresponding to the required microbiological activity.

11. Allow 5 minutes for activities validated at this contact time.

12. Allow 15 minutes for activities requiring prolonged contact.

13. Keep the surface sufficiently wet throughout the required contact time.

14. Scrub if necessary to facilitate the removal of limescale and dirt.

15. Rinse with drinking water after use.

16. Allow to dry.

17. Clean application equipment according to the hygiene protocol.

18. Store the bottle in its original packaging.

19. Follow the storage conditions specified by the manufacturer.

ANIOS SPS Premium is ready to use and requires no dilution.

Technical Specifications

• Product name: ANIOS SPS Premium

• Brand: ANIOS

• Manufacturer: Laboratoires ANIOS

• Product type: Cleaner, descaler and disinfectant

• Category: Detergent, descaler and disinfectant for sanitary facilities

• Application: Maintenance of sanitary surfaces

• Suitable surfaces: Compatible stainless steel, enamel and plastic

• Presentation: Bottle with foaming spray trigger

• Packaging: 1 × 750 ml bottle

• Capacity: 750 ml

• Use: Ready to use

• Dilution: None

• Detergent action: Yes

• Descaling action: Yes

• Disinfectant action: Yes

• Formula type: Acidic

• Active substance: Didecyldimethylammonium chloride

• Concentration: 0.15 g per 100 g

• CAS: 7173-51-5

• L(+)-Lactic acid: 2.56 g per 100 g

• CAS: 79-33-4

• Glycolic acid: 2.03 g per 100 g

• CAS: 79-14-1

• pH: Approximately 2 according to earlier technical data sheets

• Appearance: Clear liquid solution

• Colour: Blue according to earlier technical data sheets

• Descaling power: High

• Bactericidal activity: EN 13727, EN 16615, EN 17387

• Yeasticidal activity: EN 13624, EN 16615, EN 17387

• Activity against enveloped viruses: EN 14476 / EN 16777

• Bactericidal contact time: 5 to 15 minutes depending on the standard

• Yeasticidal contact time: 15 minutes

• Contact time against enveloped viruses: 5 minutes

• Recommended application quantity: Approximately 30 ml/m²

• Rinsing: With drinking water after use

• Storage: Between +5°C and +25°C according to the 2024 ANIOS technical data sheet

• Biocidal product type: PT2 – Surface disinfectants

• Use: Professional

Why Choose ANIOS SPS Premium?

• 3-in-1 action: Cleans, descales and disinfects.

• High descaling power: Helps remove limescale deposits.

• Professional formula: Suitable for maintaining sanitary facilities.

• Ready to use: No dilution required.

• Foaming spray trigger: Convenient and targeted application.

• Stainless steel surfaces: Suitable for compatible materials.

• Enamelled surfaces: Suitable for compatible sanitary equipment.

• Plastic surfaces: Can be used on compatible materials.

• Bactericidal action: Performance evaluated according to European standards.

• Yeasticidal action: Claimed activity in 15 minutes.

• Enveloped viruses: Claimed activity in 5 minutes.

• Organic acid-based formula: Contains lactic and glycolic acids.

• Sanitary disinfection: Suitable for professional hygiene protocols.

• Direct application: Easy to use.

• Washbasin cleaning: Convenient for compatible surfaces.

• Tap maintenance: Helps remove limescale marks.

• 750 ml format: Suitable for regular use.

• No dilution: Saves time during maintenance.

• Versatile application: Cleaning, descaling and disinfection in a single procedure.

• Suitable for professional studios: Useful for maintaining sanitary areas in piercing and tattoo studios.

ANIOS SPS Premium in a 750 ml foaming spray bottle is a professional 3-in-1 solution designed to clean, descale and disinfect compatible stainless steel, enamel and plastic sanitary surfaces. Thanks to its high descaling power and antimicrobial properties, it facilitates the maintenance of sanitary facilities in piercing and tattoo studios.

Safety Precautions

For professional use only.

Biocidal product intended for surface disinfection (PT2).

Use exclusively for the applications specified by the manufacturer.

Read the label and Safety Data Sheet carefully before use.

Respect the required microbiological contact times.

Do not use on skin, piercings, wounds or mucous membranes.

Do not use to disinfect or sterilize invasive instruments.

Check surface compatibility before application.

Avoid materials sensitive to acids.

Do not mix with other chemicals.

Never mix with bleach or chlorine-based products.

Do not ingest.

Avoid inhaling spray mist.

Use in a properly ventilated area.

Wear appropriate protective gloves.

Wear eye and face protection.

H290 – May be corrosive to metals.

H315 – Causes skin irritation.

H318 – Causes serious eye damage.

These hazard statements appear in the ANIOS Safety Data Sheet consulted. Check the labelling of the marketed product.

In case of eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and immediately contact a poison control centre or doctor.

In case of skin contact, remove contaminated clothing and wash thoroughly with water.

Rinse with drinking water after use.

Do not release the product directly into the environment.

Dispose of residues and packaging in accordance with applicable regulations.

Keep in the original packaging.

Follow the storage temperatures specified by the manufacturer.

Keep out of reach of children.

Use biocides safely. Always read the label and product information before use.

SEO Tags