Professional Wipes for Cleaning and Disinfection

Aseptonet Wipes are designed to meet the hygiene requirements of professional environments that require regular maintenance of surfaces and equipment.

In piercing and tattoo studios, workstations are exposed daily to handling, dirt and the risk of indirect contamination.

Piercing chairs, instrument trolleys, worktops and other frequently touched surfaces require appropriate cleaning and disinfection between procedures.

Thanks to their impregnation solution, Aseptonet wipes allow these operations to be carried out directly by wiping.

Ready to use, they integrate easily into professional hygiene protocols and allow surfaces to be treated without preparing a disinfectant solution.

Dual Cleaning and Disinfectant Action

Aseptonet Wipes combine two complementary functions.

Cleaning action helps remove dirt and residues from surfaces.

Disinfectant action helps reduce microbial contamination under validated conditions of use.

This dual action offers several advantages:

• Cleaning: Helps remove surface dirt.

• Disinfection: Acts against various microorganisms according to the claimed standards.

• Combined action: Cleans and disinfects in a single operation.

• Ready to use: No dilution required.

• Direct application: Applied simply by wiping.

• Professional use: Suitable for studio hygiene procedures.

Respecting the specified contact times is essential to achieve the claimed microbiological performance.

A Quaternary Ammonium-Based Disinfectant Solution

Aseptonet wipes are impregnated with a cleaning and disinfectant solution containing an active ingredient belonging to the quaternary ammonium family.

The composition announced for the marketed version includes:

• Didecyldimethylammonium chloride: 0.29%.

• CAS number: 7173-51-5.

• Less than 5% non-ionic surfactants.

• Fragrance.

This formulation combines cleaning action with disinfectant activity on compatible surfaces.

Quaternary ammonium compounds are used in various professional solutions designed to reduce microbial contamination on surfaces.

The wipes are intended for disinfecting compatible surfaces and equipment, not for directly disinfecting piercings or wounds.

Bactericidal Activity in 5 Minutes

Aseptonet wipes provide bactericidal activity evaluated according to several European standards.

The claimed performance includes:

• EN 13727: Bactericidal activity.

• EN 1276: Bactericidal activity.

• EN 13697: Bactericidal activity on surfaces.

• EN 16615: Bactericidal activity under the standard's test conditions.

Claimed contact time: 5 minutes.

These properties contribute to the disinfection of compatible surfaces under the specified conditions of use.

To achieve the claimed effectiveness, the surface must be sufficiently wetted and remain wet throughout the required contact time.

Yeasticidal Activity

Aseptonet wipes also provide yeasticidal activity, designed to act against certain yeasts.

The claimed standards include:

• EN 13624: Yeasticidal activity.

• EN 13697: Yeasticidal activity on surfaces.

• EN 1650: Yeasticidal activity.

• EN 16615: Yeasticidal activity under the standard's test conditions.

Claimed contact time: 5 minutes.

This activity complements the product's disinfectant properties for maintaining professional surfaces.

Limited-Spectrum Virucidal Activity

Aseptonet wipes provide limited-spectrum virucidal activity, according to the conditions specified in the commercial documentation.

The claimed performance includes:

• EN 14476: Virucidal activity.

• EN 16777: Virucidal activity on surfaces.

The viruses and viral models mentioned include:

• Adenovirus.

• Norovirus.

• Vaccinia virus.

• Herpes virus.

• PRV, used as a model virus.

• BVDV, used as a model virus.

• Coronaviruses under the tested conditions.

• HIV.

• Rotavirus.

Claimed contact time: 5 minutes.

These results correspond to the specified test conditions and must not be interpreted as universal effectiveness against all viruses.

Suitable for Hard, Non-Porous Surfaces

Aseptonet Wipes are intended for cleaning and disinfecting compatible hard, non-porous surfaces.

They may be used on:

• Compatible worktops.

• Professional instrument trolleys and carts.

• Furniture surfaces.

• Compatible piercing chairs.

• Handles and frequently touched areas.

• Small non-invasive equipment.

• Compatible professional equipment surfaces.

It is recommended to check the product's compatibility with materials before use.

The manufacturer specifically indicates incompatibility with PC-ABS.

A preliminary test on a small, inconspicuous area is advisable, particularly for delicate surfaces or surfaces with special coatings.

Suitable for Piercing and Tattoo Studios

In piercing and tattoo studios, cleaning and disinfecting surfaces is an important part of hygiene protocols.

Aseptonet wipes allow compatible surfaces to be treated directly and can be incorporated into workstation maintenance procedures.

They are particularly convenient for:

• Piercing chairs.

• Professional instrument trolleys.

• Worktops.

• Equipment preparation surfaces.

• Handles and frequently touched areas.

• Compatible non-invasive equipment.

• Professional furniture surfaces.

Their format allows targeted application without preparing a liquid solution.

These wipes do not replace immersion disinfection or sterilization of invasive instruments when such procedures are required.

A Convenient Solution for Maintenance Between Clients

Aseptonet wipes are particularly suitable for regular maintenance procedures.

Their use requires:

• No dilution.

• No mixing.

• No additional spray bottle.

• No separate cloth for applying the solution.

Simply remove a wipe and apply it to the surface to be cleaned and disinfected.

This simplicity helps organize hygiene procedures between clients.

Quick application does not eliminate the need to respect the 5-minute contact time.

A 5-Minute Contact Time

Aseptonet wipes have a claimed contact time of 5 minutes for the microbiological activities indicated in their commercial documentation.

For effective application:

• Remove one or more wipes.

• Wipe the surface thoroughly.

• Ensure the entire area is wetted.

• Allow the product to act for 5 minutes.

• Keep the surface sufficiently wet.

• Follow any applicable rinsing instructions.

The number of wipes used must be adapted to the surface area being treated.

A Resealable Pack of 100 Wipes

Aseptonet Wipes are supplied in a pack of 100, a convenient format for professionals.

The resealable pack allows wipes to be removed easily while helping preserve the moisture of the remaining wipes.

This format offers several advantages:

• Quick access: Wipes are easy to remove.

• Resealable pack: Helps prevent drying out.

• Convenient format: Suitable for workspaces.

• 100 wipes: Suitable for regular professional use.

• Simplified storage: Keeps wipes in their original packaging.

• Consumable management: Makes it easier to replenish hygiene supplies.

Packaging: 1 pack of 100 single-use wipes.

Single-Use Wipes

Aseptonet wipes are intended for single use only.

Each wipe must be discarded after use to prevent the reuse of potentially contaminated material.

This helps to:

• Reduce the risk of cross-contamination.

• Provide a clean wipe for each application.

• Simplify maintenance procedures.

• Reduce the handling of reusable cleaning materials.

A used wipe must never be placed back into the pack.

Dosage Adapted to the Surface Area

According to the product's commercial instructions, it is recommended to use 3 wipes per m² of surface to be cleaned and disinfected.

This indication helps adapt the number of wipes used to the surface area being treated.

For correct application:

• Use enough wipes.

• Completely wet the surface.

• Respect the contact time.

• Repeat the application if necessary.

• Do not use dried-out wipes.

The quantity required may vary depending on the nature, size and condition of the surface.

Directions for Use

1. Read the product label and safety precautions.

2. Check that the surface to be treated is compatible with the product.

3. Wear the protective equipment required by the instructions.

4. Open the pack of wipes.

5. Remove one Aseptonet wipe.

6. Close the pack carefully to preserve the moisture of the remaining wipes.

7. Apply the wipe to the surface to be cleaned and disinfected.

8. Thoroughly wipe the entire area.

9. Use enough wipes to completely wet the surface.

10. Follow the recommended consumption of 3 wipes per m².

11. Allow a contact time of 5 minutes.

12. Ensure the surface remains sufficiently wet throughout the contact time.

13. Do not rinse surfaces for which the manufacturer does not require rinsing.

14. Rinse food-contact surfaces according to the instructions.

15. Dispose of used wipes through the appropriate waste disposal system.

16. Never reuse a wipe.

17. Repeat the procedure according to the hygiene protocol.

18. Close the pack carefully after use.

Aseptonet wipes are ready to use and intended for single use only.

Technical Specifications

• Product name: Aseptonet

• Brand: Aseptonet

• Product type: Cleaning and disinfectant wipes

• Application: Cleaning and disinfection of surfaces and compatible small equipment

• Presentation: Resealable pack of impregnated wipes

• Packaging: 1 pack of 100 wipes

• Number of wipes: 100

• Use: Ready to use

• Single use: Yes

• Dilution: None

• Impregnation solution: Cleaning and disinfectant solution

• Active substance family: Quaternary ammonium compounds

• Claimed active substance: Didecyldimethylammonium chloride

• Claimed concentration: 0.29%

• CAS number: 7173-51-5

• Other ingredients: Less than 5% non-ionic surfactants, fragrance

• Bactericidal activity: According to EN 13727, EN 1276, EN 13697 and EN 16615

• Yeasticidal activity: According to EN 13624, EN 13697, EN 1650 and EN 16615

• Limited-spectrum virucidal activity: According to EN 14476 and EN 16777

• Claimed contact time: 5 minutes

• Suitable surfaces: Compatible hard, non-porous surfaces

• Suitable equipment: Compatible small equipment and non-invasive devices

• Indicative consumption: 3 wipes/m²

• Rinsing: Not required unless otherwise specified

• Food-contact surfaces: Rinsing required

• Incompatible material: PC-ABS

• Storage: Protect from freezing

• Maximum storage temperature: 40°C

• Use: Professional

Why Choose Aseptonet Wipes?

• Dual action: Clean and disinfect surfaces.

• Ready to use: No dilution required.

• Single use: Prevents the reuse of wipes.

• Bactericidal: Activity evaluated according to several European standards.

• Yeasticidal: Activity against certain yeasts.

• Limited-spectrum virucidal: Activity claimed according to EN 14476 and EN 16777.

• 5-minute contact time: Helps organize maintenance procedures.

• Direct application: No spray bottle required.

• Resealable pack: Helps preserve moisture.

• Pack of 100: Suitable for regular professional use.

• Targeted maintenance: Convenient for compatible surfaces and equipment.

• Indicative dosage: 3 wipes/m².

• Compatible surfaces: Suitable for hard, non-porous surfaces.

• Professional use: Designed for environments requiring rigorous maintenance.

• Suitable for studios: Supports hygiene protocols for piercers and tattoo artists.

Aseptonet wipes, supplied in a pack of 100, provide a ready-to-use professional solution for cleaning and disinfecting compatible surfaces and small equipment. Their bactericidal, yeasticidal and limited-spectrum virucidal properties, combined with a claimed contact time of 5 minutes, make them a convenient consumable for regular maintenance in piercing and tattoo studios.

Safety Precautions

For professional use only.

Use exclusively for the applications specified by the manufacturer.

Wipes intended for cleaning and disinfecting compatible surfaces and equipment.

Do not use to disinfect piercings, wounds or mucous membranes directly.

Do not use for sterilizing invasive instruments.

Do not replace cleaning, immersion disinfection or sterilization procedures when these are required.

Do not reuse wipes after use.

Respect the 5-minute contact time under the specified conditions.

Use enough wipes to keep the surface wet throughout the required period.

Check material compatibility before use.

Do not use on PC-ABS materials.

Test the product on a small, inconspicuous area before application.

Follow the recommendations of the manufacturers of the equipment being treated.

Rinse food-contact surfaces according to the instructions.

Read the product label, instructions and Safety Data Sheet before use.

Wear appropriate protective equipment when necessary.

Wash hands thoroughly after use.

Avoid contact with the eyes.

Do not ingest.

Do not mix with other chemicals.

Close the pack carefully after each use.

Do not use dried-out wipes.

Do not flush wipes down the toilet.

Avoid releasing the product into the environment.

Dispose of used wipes according to applicable local regulations.

Keep in the original packaging.